Conveyor Impact Idler, Rubber Disc Roller, Steel | RFQ Sourcing Details

For various reasons, the conveyor belt may tend to drift laterally at times. In these cases, , it's possible to use rollers to limit the problem .

These special rollers for conveyors allow a continuous and immediate alignment of the belt, despite the stress to be beard due to the transportation of heavy loads.Their use allows a more efficient, long-lasting and safer functioning of the conveyor system.

To keep the belt in the right running helps to avoid slips and fall risks of the conveyed materials for operators during functioning and reduce the waste of resources. Of course, this also cut downtimes and unplanned maintenance interventions of the belt.

As last consequent advantage, the use of rollers for conveyor may clearly increase productions and profits of the industry in question. Product Parameters Common Roller Type Impact idlers are used at the receiving end of belt conveyors to reduce the impact of falling materials on the conveyor belt.

They are corrosion-resistant, flame-retardant, antistatic, and light in weight, and are widely used in mining. The polymer material used for the roller body has good wear resistance and good self-lubricating properties, does not damage the belt, and has a service life of more than 5 times that of ordinary rollers.

Specification of Impact Conveyor Roller Idlers: Diameter(mm) Shaft Diameter Bearing Part No.

Min Bearing Dynamic Loading Pating(N) 127mm 25mm N 133mm 25mm N 152mm 25mm N 159mm 25mm N 127mm 25mm N 133mm 25mm mm 25mm N 159mm 25mm N 152mm 30mm N 178mm 30mm N 178mm 35mm N 203mm 35mm N 178mm 40mm N 203mm 40mm N 203mm 45mm N 203mm 50mm N 250mm 60mm N Disc return rollers are used where material is likely to collect on the roller surface, eventually leading to premature failure.

Rings reduce material buildup on the roller housing. Standard material for rings is rubber. Routine cleaning should still be performed to maximize service life.

Specification of d isc return rollers : Tube(mm) Ring Size(mm) 63.5mm 89mm,108mm,133mm,150mm,180mm,210mm,250mm 76.1mm 108mm,133mm,159mm 88.9mm 133mm,150mm,159mm,180mm,270mm,330mm 108mm 159mm,180mm,195mm,219mm Steel spiral return idlers are used to support the return side of the belt. They ar