Nsshoeu-J 0.6/1kv 4X25mm2 4X50mm2 Flexible Mining | RFQ Sourcing Details

NSSHOEU-O/J 0.6/1kV Heavy Duty Flexible Cable Applications For flexible use and fixed installation open-cast mining applications, in quarries, on construction sites and similar applications, with heavy mechanical stresses.

The cables can be used indoors as well as outdoors, in explosion-hazard areas, in industry and in agriculture. They can be used permanently in waste water up to 40°C at a depth of max.

500 m and in industrial water, cooling water, surface water, rainwater and mixed water - and in groundwater and seawater to a more limited extent.

The requirements for accessibility and inspection depend on the consistency of the water.In aggressive water or composed of special substances, the cable's resistance properties should be tested.

In other respects the specifications of DIN VDE 0298 part 3 applies Standards VDE 0250 Part 812 Construction CONDUCTORS Flexible stranded tinned copper conductor, class 5 according to DIN VDE 0295. INSULATION Heat resistant EPR type 3GI3. INNER SHEATH SR/SBR/PCP/CR type GM1b/5GM3.

OUTER SHEATH Chlorinated rubber PCP/CR type 5GM5, abrasion and tear resistant, oil resistant and flame retardant. Thermal parameters Rated voltage 0.6/1 kV (600/1000V) Max. permissible operating voltage AC 0.7/1.2 kV Max.

permissible operating voltage DC 0.9/1.8 kV AC test voltage 3 kV Duration of AC test voltage 5 min. Max. permissible temperature at conductor 90 °C Max.

short circuit temperature of the conductor 250 °C Max.permissible water temperature 40 °C (for higher temperatures a life time reduction is expected) NSSHOEU-O NUMBER OF CORES×NOMINAL CROSS SECTION MINIMUM OVERALL DIAMETER MAXIMUM OVERALL DIAMETER NOMINAL WEIGHT NO.

×MM^2 MM MM KG/KM 1× × × × × × × × × × × × NSSHOEU-J NO. ×MM^2 MM MM KG/KM 3× ×70/ ×95/ ×120/ × × × × × × × × × × × × × × × × × × × × × × ×