ISO/ANSI/DIN Standard Short Pitch Precision Rolle | RFQ Sourcing Details

BASIC INFO. Type: Simplex, Duplex, Triplex Sprocket Model: 3/8 " ,1/2 ",5/8",3/4",1",1.25",1.50",1.75",2.00",2.25",2.00",2.25",2.50", 3" Teeth Number: 9-100 Standard: ANSI , JIS, DIN, ISO Material: 1020, 1045, SS304 , SS316;As Per User Request.

Performance Treatment: Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding Surface Treatment: Black of Oxidation, Zincing, Nickelage.

Characteristic Fire Resistant , Oil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc Design criterion ISO DIN ANSI & Customer Drawings Application Industrial transmission equipment Package Wooden Case / Container and pallet, or made-to-order Certification: ISO9001 SGS Quality Inspection: Self-check and Final-check Sample: ODM&OEM, Trial Order Available and Welcome Advantage Quality first, Service first, Competitive price, Fast delivery Delivery Time 10 days for samples.

15 days for official order. INSTALLATION AND USING The chain wheel, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane.

The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE When fitting new chain spoket it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket.

This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the t