High Performance In | RFQ Sourcing Details

Poly V belt driven conveyor rollers have the characteristics of high and offer the possibility of both Transportation and Zero Line Pressure accumulation (with the use of integral photocells).

Used in conveyors with decentralised drives this type of conveyor roller can provide a highly modular solution creating the possibility to add/remove zones from conveyor schemes with ease. 1. The design of precision ball bearings and plastic inner and outer jackets constitute a key bearing component.

It is not only beautiful but also makes the rollers run quieter. 2. The design of the plastic end cap at the end of the roller can prevent the damage of dust and splashing water on the bearing to a certain extent. 3. ISO9982, PJ type, groove pitch 2.34mm, 9 grooves in total. 4.

Suitable for high-speed conveyance, the speed will vary according to the diameter and the length of the roller, up to 120m/min. 5. Applicable temperature: -5ºC to +40ºC.

Product Parameters Material of tube Tube diameter and wall thickness Galvanized steel Φ 50*1.5 Φ 60*2.0 Φ 76*3.0 Stainless steel Φ 50*1.5 Φ 60*2.0 Φ 76*3.0 Roller diameter(D) Shate diameter(d) Sprocket A C d0 Φ 50 Φ 12 L=W+70 08B11T 17 18.5 Φ 45.08 Φ 60 Φ 12/15 L=W+70 08B14T 17 18.5 Φ 57.07 Φ 76 Φ 20 L=W+78 10A13T 20 18.5 Φ 66.33 Φ12(M6*10) Φ15(M8*15) Φ20(M12*20) Φ 50,60mm rollers are available with PVC soft glue (2mm, 3mm) Mark:can be customized Detailed Photos