Heavy Duty Material Handling Conveyors Machine Bu | RFQ Sourcing Details

Heavy Duty Material Handling Conveyors Machine Bucket Elevator Product Classification: conveying equipment series TD series bucket elevator is suitable for vertically conveying powdery, granular, and small pieces of granular materials with less abrasive absorption, such as grain, coal, cement, crushed ore, etc.

The lifting height can reach 40m. Product Introduction TD series bucket elevator is suitable for vertically conveying powdery, granular, and small pieces of loose materials with less abrasive absorption, such as grain, coal, cement, crushed ore, etc. The lifting height is 40m.

TD bucket elevator is designed and manufactured in strict accordance with JB3926-85 Vertical Bucket Elevator. Currently, all bucket elevators in common use are vertical.

Working Principle TD series bucket elevator (belt type bucket elevator) is composed of a running part (hopper and traction tape), an upper section with a driving roller, a lower section with a tensioning roller, an intermediate casing, a driving device, a backstop brake device, etc.

It is suitable for conveying loose density upward ρ < 1.5t/m ³ Powdery, granular and small nonabrasive and semi-abrasive bulk materials, such as coal, sand, coke powder, cement, crushed ore, etc. Technical Characteristics 1. The drive power is small, and the hopper with a large capacity is arranged intensively.

There is almost no material return and excavation during material lifting, so the invalid power is less. 2. The lifting range is wide. TD series bucket elevator has few requirements on the types and characteristics of materials.

It can lift not only ordinary powdery and small granular materials, but also materials with high grind ability. Good sealing, less environmental pollution. 3. Good operation reliability. Its design principle and processing method ensure the reliability of the whole machine operation.

The fault-free time exceeds 20000 hours. The lifting height is high and the operation is stable, so a higher lifting height can be achieved. 4. It has a long service life. The feeding adopts the inflow type, without the need to dig materials with a bucket. There is little extrusion and collision between materials.

During the design, the materials are guaranteed to be less scattered during feeding and unloading, reducing mechanical wear. Technical Parameter About Transportation After you place the order and pay the deposit