EPDM Seals Production Line, Microwave Rubber Seal | RFQ Sourcing Details

I. Features 1. Automatic thermostat circulating vulcanizing box is the vulcanization device of rubber seals. Appearance requirements: Smooth and tidy.

(1) This machine is used to electricity heating tube automatic thermostat which temperature control accuracy of +/-2° C, the temperature range at room temperature to 260 degrees. (2) Effective length of vulcanization box is 24m, centrifugal fan circulation.

It liner with 120stainless steel and the middle insulating layer is fully filled with aluminum silicate cotton.

(3) Vulcanization box is divided into three zones, each zone with trimmer potentiometer which adjusts the speed of the three zones of vulcanizing box to equilibrium;In the middle of each zone with the ventilating device, and removing the emissions generated by the vulcanization process in time in order to ensure the smoothness of the rubber products.

2. The entire production line speed is adjustable to match with speed of the extruder. Product Parameters II.

Technical parameter Highest temperature of the groove Room temperature 280ºC Conveying speed 2-28.5 m/min Conveying mode Heat-resistant belt conveyor Product tunnel outlet size 160(H)x200mm Vulcanizing groove 1 piece per set Voltage 3 phase AC380V 50HZ Effective length 8000mm Width of conveyor belt 140mm Speed control Frequency conversion synchronous control Device size(LXWXH)(mm) 9500x670x1310 Detailed Photos III.

Picture for reference IV. Related products Test Before Delivery Before leaving factory, this rubber vulcanizing machine needs to pass 24 hours' test running and guarantee no oil leakage and seeping to avoid unnecessary quality problems. VI.

Packaging Equipment painting completed before delivery, and then wrapped with stretch film, to protect the painting surface, we use wooden packaging outside.The key parts of the machine, such as electronic control box, will be wrapped by shockproof packaging materials, and then packed in wooden cases. VII.

Our service 1. Test running: The above machines are all passed inspection of 3~5 hours of full load operation before leaving our factory. And we will take the video and send it to you for inspection. You can use it directly thus saving the time of test-run and expense. And we also warmly welcome to