Customized Steel Threading Cable Drag Chain for T | RFQ Sourcing Details

Custom Bridge Type Steel Threading Chain Machine Tool Oil Pipe Cable Drag Chain What is Steel Cable Chain? Steel Cable carriers are designed to guide, contain, and protect electrical cables/Oil pipes and hoses during machine movement. For use in dynamic applications between fixed and moving portions of the machine.

Cable carriers reduce wear on cables and tubes, prevent cable entanglement, improve machine operation and appearance.

Principle for selecting cable chain inner height :take the most thick piece of the internally installed cable ,oil pipe,gas pipe or water pipe as the reference height plus 10%of the space height at least as the inner height HI.if overlapping ,take the overlapped height as the actual height .

inner width :take the sum of the outside diameter of the thicker cables ,oil pipe,gas pipe or water pipe as the reference of the inner width and leave at least 10% of the space as a margin radius of a bend :take the biggest radius of a bend of a cable ,oil pipe,gas pipe or water pipe as a reference value and leave 10%of the space as a margin Instruction principles for internally laid cable ,oil pipe ,water pipe or gas pipe 15%of the space should be reserved as a margin so that the internally laid cables and oil pipes can move freely and there will not be any stress on the drag chains in the direction of radius .

for those cables that are quite different in diameter ,they should be laid separa n operating in high speed or high frequency ,the horizontally laid cables should be in a parted way and should not be overlapped ,if too many cables ,gas pipes and oil pipes laid together ,it is recommended that spacers be used Construction of the cable chain The appearance of the chain looks like the crawler of a tank consisting of certain number of joints.The joints of crawler are freely turned round.

The same series of chain has same inner height and outer height and same pitch but the inner width and bend radius (R) can be made per different specifications. A unit chain joint is consisting of a left-right chain plate and a updown cover.

Each chain joint can be opened up so as to facilitate assembly and dismantal without threading.Cables,oil pipes and gas pipes can be put into the drag chain after the cover plate