Compact 1.6-Ton Seated Electric Forklift with Sol | RFQ Sourcing Details

This compact seated electric forklift is configured for lifting, stacking, loading, unloading, and transferring palletized goods.

Its listed 1.6-ton capacity and 500 mm load center suit general warehouse and industrial handling tasks, while the 1,650 mm turning radius supports maneuvering where operating space is limited. The specified truck measures 2,890 mm long and 1,100 mm wide.

It has a 3,000 mm maximum lifting height, a 2,150 mm lowered mast height, and a 3,960 mm fully extended mast height. The forks measure 35 × 100 × 1,070 mm. Listed aisle-width requirements are 3,000 mm for a 1,200 × 1,000 mm pallet with 200 mm clearance and 3,200 mm for an 800 × 1,200 mm pallet with the same clearance.

The documented base configuration identifies seated operation, rear-wheel drive, an AC motor, hydraulic lifting and tilting, and solid tires. The mast tilts 5 degrees forward and 9 degrees backward. Ground clearance is listed as 110 mm beneath the lowered, fully loaded mast and 100 mm beneath the vehicle body.

The product information also describes regenerative braking, three adjustable operating modes, automatic deceleration while turning, hydraulic brakes, an adjustable seat, and a display for temperature, speed, and voltage. Battery information requires confirmation before ordering.

The specification table lists a 72 V/140 Ah lead-acid battery, while the descriptive material also discusses lithium-ion configurations and low-temperature operation. Buyers should therefore confirm the exact battery chemistry, capacity, charger, charging supply, and expected operating time for the selected build.

Several other details vary or conflict within the supplied information. The listing presents the machine as a pallet truck, but the documented seated cab, mast, lift height, and forklift dimensions describe a compact counterbalanced electric forklift.

Warranty statements also range from one year to 12 months or 2,000 operating hours, with separate references to extended and battery coverage. These points should be settled in the final technical specification and purchase agreement.

Before procurement, request a configuration sheet and dimensional drawing tied to the exact model.

Confirm rated capacity at the required lift height and attachment position, pallet and aisle compatibility, battery package, tire selection, safety equipment, overhead-guard configuration, charger standard, service scope, spare-parts availability, training requirements, and the warranty applicable to the complete truck and battery.