Apure Ptsa Portable Inline Fluorometer with Senso | RFQ Sourcing Details

Products Description The SR-510 inline fluorometer sensor measures the concentration of fluorescence tracer PTSA in water. The standard T Connector provided with each SR-510 sensor, has two 3/4'' female NPT threads and can be placed to an existing 3/4'' sample water line.

The 4-20mA current output of theSR-510 sensor can be connected to any controller that accepts an isolated or non-isolated 4-20mA input. The SR-510 sensor has a short fluidic channel and can be easily cleaned.

The fluidic and optical arrangement of the SR-510 sensor is designed to overcome shoarcomings associated with other florometers that have a distal sensor surface or a long, narrow fluidic .

Traditional inline fluorometers are susceptible to color, turbidity interference, and fouling, making them very difficult to properly clean.

• The dosage of fluorescent agent PTSA can be reduced, the dosage ratio is 1000:0.5;• A standard solution with fluorescent PTSA concentration between 20~100 ppb can be used;l Automatically compensate for turbidity not higher than 40NTU;• Automatically compensate the chromaticity equivalent to 10ppm iron;Specification* SR-510 Sample Temperature 4-40ºC PTSA Range 0-200 ppb PTSA Resolution 1 ppb PTSA Accuracy ±1% of reading Calibration Two-point(0,200)/Four-point(0, 50,100, 200) calibration against standard solution Outputs 4-20mA Analog Outputs, RS485 Modbus RTU Digital Output Installation With 3/4"FNPT socket & threaded ports Cable Length 5m, IP67 Power Supply 22-25VDC,2W Dimension Length:160mm, Diameter:22mm Weight 250g Material SS304 Operational Temperature 4-49ºC Storage Temperature -20~60ºC Pressure ≤4bar Flow Rate 200-500L/H Warranty 12 months, except the spare parts MORE PRODUCTS >>> Certificate